1:8 Outdoor FTTH Fiber Optic Splitter Box, 72 Cores Fusion Splice Enclosure PP+GF
This splice closure integrates distribution and splitting in one, can realize the direct fusion and branching of the optical cable, and is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection; the unique three-tier design of the box body can be used as a fiber splitter or splice box; the flip board can be flipped≥180°,it is more convenient to install the box or maintenance. If remove the board, it can bed as a splice closure to meet different choices.
Features
- The product is made of high-quality impact resistant plastic and has a standard user interface that can be re-opened.
- Can accommodate two 1x8 PLC splitter LGX module or steel tube type;
- Anti-ultraviolet,anti- impact and waterproof function;
- Unique flip board, flip angle ≥ 180 °, fusion area and distribution area is more obvious, reducing the cable crossing;
- Fiber optic cable can go in and out of the box without cut the cable.
Specification
| Model | GJS-2022-S | GJS-2022-F |
| Dimension (mm) | 290*190*110 | 290*190*90 |
| Cable diameter (mm) | Φ7-φ18 | Φ7-φ18 |
| Cable port | 4pcs round ports, 16pcs 2*3mm drop cable ports | 2in 2 out |
| Max. Split ratio | 2pcs 1x8 mini splitter | / |
| Max. Splice tray | 1pc | 3pcs |
| Max. Fusion splice | 24 cores | 72 cores |
More product details:
Model:GJS-2022-F Model:GJS-2022-S
the box can use as splice closure, maximum can the box can use as a splitting box,
install 3pcs splice tray, 72 cores single fiber. maximum hold 1pc 1:16 micro splitter
or 2pcs 1:8 spliter-- on the right
Technical parameters
- Optical fiber radius of curvature: ≥40mm
- Splice tray additional loss: ≤0.1dB
- Temperature range: -40°C ~ +60°C
- Anti side pressure: ≥2000N/10cm
- Impact resistance: ≥20N.m
- Protection class: IP65
Packing list
| Main body | 1 set |
| L=400mm bare fiber buffer tube | 2 pcs |
| Hoop / clamp | 2 pcs |
| 3x100 nylon tie | 26 pcs |
| Heat shrinkable tube L=60mm | 2-72 pcs (configuration on demand) |
| User manual | 1pc |
More product in details:
BOX+accessories,standard: aerial mount kits, nylon tie, cable clamp, scews, heat shrink tube,etc.
splitter cassette 1:8, it can hold 1x2,1x4,1x8 withh SC adapters; 1piece 24 cores fusion splice tray
buckle/spring lock for box, special design, easy to operate and close;
4round ports, each 2round one at both side, with 16pcs drop cable ports
Product Tags:
|
|
Outdoor FTTH Fiber Cable Joint Box , 72 Cores Fusion Splitter Distribution Box Images
|
